Soldering Technician
@BranexGroup @BranexGroup Holly, MI Holly, MI Full-time Contract Full-time Contract $25 - $39 an hour $25 - $39 an hour 2 days ago 2 days ago 2 days ago Repair Technician POSITION
Summary:
This position will function as a member of the Post SMT FF.
Main priority will be to diagnose and repair electrical problems on all SMT/ICT boards.
Additional duties would be to perform PM's on all supported equipment and work on assigned projects ranging from simple program modifications to major rebuilds with mechanical, pneumatic and electronic work.
REQUIRED SKILLS/EXPERIENCE Associate's degree preferred.
Demonstrated ability to read schematics, troubleshoot and solder.
Ability to work on all equipment and products in designated area of responsibility.
Must have current knowledge of electronics and be able to apply it to the job.
A heavy emphasis on analysis and debugging of products and equipment.
General computer skills including use of Excel, Access, and Word.
Demonstrate good interpersonal and written/verbal communication skills.
Be able to work in a team environment.
Flexible in schedule.
This job sometimes requires a significant amount of overtime.
Work is complex and difficult in character and requires strong technical knowledge.
IPC and Solder certifications will be required.
Ability to lift a minimum of 20lbs to work on related equipment.
DUTIES:
Production support, addressing all product failures & board level concerns.
Diagnosis of both product and equipment, including logging as defined by procedure or practice.
Preventative maintenance for test equipment.
Update equipment, solve mechanical and electrical problems, and takes direction for proper repairs in support of the production floor.
Cross shift communication of daily issues/concerns.
Participates in continuous improvement activity.
May work on projects involving cost reduction, up-time improvement, or evaluation of new equipment, etc.
Establishes new preventative maintenance procedures and periodically audits/updates existing procedures.
Works independently on assigned projects that range from simple program modifications to major rebuilds that may have a mechanical, pneumatic or electronic scope.
Job Types:
Contract, Full-time Pay:
$25.
00 - $39.
00 per hour Schedule:
10 hour shift 8 hour shift Ability to commute/relocate:
Holly, MI:
Reliably commute or planning to relocate before starting work (Required) Education:
Associate (Preferred)
Experience:
Soldering:
3 years (Preferred) Work Location:
In person Associate's degree preferred.
Demonstrated ability to read schematics, troubleshoot and solder.
Ability to work on all equipment and products in designated area of responsibility.
Must have current knowledge of electronics and be able to apply it to the job.
A heavy emphasis on analysis and debugging of products and equipment.
General computer skills including use of Excel, Access, and Word.
Demonstrate good interpersonal and written/verbal communication skills.
Be able to work in a team environment.
Flexible in schedule.
This job sometimes requires a significant amount of overtime.
Work is complex and difficult in character and requires strong technical knowledge.
IPC and Solder certifications will be required.
Ability to lift a minimum of 20lbs to work on related equipment.
Production support, addressing all product failures & board level concerns.
Diagnosis of both product and equipment, including logging as defined by procedure or practice.
Preventative maintenance for test equipment.
Update equipment, solve mechanical and electrical problems, and takes direction for proper repairs in support of the production floor.
Cross shift communication of daily issues/concerns.
Participates in continuous improvement activity.
May work on projects involving cost reduction, up-time improvement, or evaluation of new equipment, etc.
Establishes new preventative maintenance procedures and periodically audits/updates existing procedures.
Works independently on assigned projects that range from simple program modifications to major rebuilds that may have a mechanical, pneumatic or electronic scope.
10 hour shift 8 hour shift Holly, MI:
Reliably commute or planning to relocate before starting work (Required) Associate (Preferred) Soldering:
3 years (Preferred).
Estimated Salary: $20 to $28 per hour based on qualifications.
Summary:
This position will function as a member of the Post SMT FF.
Main priority will be to diagnose and repair electrical problems on all SMT/ICT boards.
Additional duties would be to perform PM's on all supported equipment and work on assigned projects ranging from simple program modifications to major rebuilds with mechanical, pneumatic and electronic work.
REQUIRED SKILLS/EXPERIENCE Associate's degree preferred.
Demonstrated ability to read schematics, troubleshoot and solder.
Ability to work on all equipment and products in designated area of responsibility.
Must have current knowledge of electronics and be able to apply it to the job.
A heavy emphasis on analysis and debugging of products and equipment.
General computer skills including use of Excel, Access, and Word.
Demonstrate good interpersonal and written/verbal communication skills.
Be able to work in a team environment.
Flexible in schedule.
This job sometimes requires a significant amount of overtime.
Work is complex and difficult in character and requires strong technical knowledge.
IPC and Solder certifications will be required.
Ability to lift a minimum of 20lbs to work on related equipment.
DUTIES:
Production support, addressing all product failures & board level concerns.
Diagnosis of both product and equipment, including logging as defined by procedure or practice.
Preventative maintenance for test equipment.
Update equipment, solve mechanical and electrical problems, and takes direction for proper repairs in support of the production floor.
Cross shift communication of daily issues/concerns.
Participates in continuous improvement activity.
May work on projects involving cost reduction, up-time improvement, or evaluation of new equipment, etc.
Establishes new preventative maintenance procedures and periodically audits/updates existing procedures.
Works independently on assigned projects that range from simple program modifications to major rebuilds that may have a mechanical, pneumatic or electronic scope.
Job Types:
Contract, Full-time Pay:
$25.
00 - $39.
00 per hour Schedule:
10 hour shift 8 hour shift Ability to commute/relocate:
Holly, MI:
Reliably commute or planning to relocate before starting work (Required) Education:
Associate (Preferred)
Experience:
Soldering:
3 years (Preferred) Work Location:
In person Associate's degree preferred.
Demonstrated ability to read schematics, troubleshoot and solder.
Ability to work on all equipment and products in designated area of responsibility.
Must have current knowledge of electronics and be able to apply it to the job.
A heavy emphasis on analysis and debugging of products and equipment.
General computer skills including use of Excel, Access, and Word.
Demonstrate good interpersonal and written/verbal communication skills.
Be able to work in a team environment.
Flexible in schedule.
This job sometimes requires a significant amount of overtime.
Work is complex and difficult in character and requires strong technical knowledge.
IPC and Solder certifications will be required.
Ability to lift a minimum of 20lbs to work on related equipment.
Production support, addressing all product failures & board level concerns.
Diagnosis of both product and equipment, including logging as defined by procedure or practice.
Preventative maintenance for test equipment.
Update equipment, solve mechanical and electrical problems, and takes direction for proper repairs in support of the production floor.
Cross shift communication of daily issues/concerns.
Participates in continuous improvement activity.
May work on projects involving cost reduction, up-time improvement, or evaluation of new equipment, etc.
Establishes new preventative maintenance procedures and periodically audits/updates existing procedures.
Works independently on assigned projects that range from simple program modifications to major rebuilds that may have a mechanical, pneumatic or electronic scope.
10 hour shift 8 hour shift Holly, MI:
Reliably commute or planning to relocate before starting work (Required) Associate (Preferred) Soldering:
3 years (Preferred).
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
